SKU:
K3076B
Availability:
Sorry, these are no longer available from Pro Comp Suspension
2003-2006 Jeep Wrangler TJ 4" Stage 1 Short Arm Lift Kit - Pro Comp K3076B
Pro Comp K3076B is the perfect lift kit for your 2003-2006 Jeep Wrangler TJ! Provides a smooth compliant ride. Precise steering without bump-steer. Improves load capacity and reduces axle wrap. Maintains factory ride quality all while improving handling. If you're tired of the other guys failing rusty powder coat kits with no warranty and only a 1 year warranty of the parts then Pro Comp has you covered! This Pro Comp Lift Kit has all the boxes checked and is the most complete lift kit on the market today! Don't put a cheapo going to rust kit on your rig! Do it right with a Pro Comp Lift Kit!
This Pro Comp Lift Kit Fits-
- 2003-2006 Jeep Wrangler TJ
This 4" Pro Comp Lift Kit Includes-
- Front Coil Springs
- Rear Coil Springs
- Front ES3000 Shocks
- Rear ES3000 Shocks
- Tubular Lower Control Arms
- Front Sway Bar Links
- Rear Track Bar Bracket
- Rear Sway Bar Links
- Hardware
- Instructions
Wheel/Tire Fitment -
- Not To Exceed 4.5" Back Space
- Max Tire Size 33"
- 5 x 4.5" Bolt Pattern
Notes-
- Driveline modifications may be required for height increases over 1.5" due to increased driveline angles.
- Transfer case SYE (Slip Yoke Eliminator) kit and CV rear drive shaft required for Long Arm Applications.
- Rubicon models will require CV drive shaft with flange adapter (not avail from Pro Comp).
- Vehicles with Auto Trans will require removal of front skid plate when using transfer case lowering hardware.
- All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
- Coil spacer 55496 can be used to increase front ride height by .75"
- Replacement Lower Control Arm Bushing kit 90-6048B
- Vehicle will require alignment after kit is installed.
- Front cambolt kit 20-65226 is recommended for caster angle adjustments. In most cases, reducing positive caster to the minimum factory specification will reduce or eliminate the potential for steering wheel shimmy.
- Rear cambolt kit 20-65225 can be used for tuning pinion angle for minor driveline vibration correction.
- Installation of JTB403 track bar requires track bar drop bracket 55300 and drop Pitman arm YJ400
- Installation time 6-8 hours.
Fits-
- 2003, 2004, 2005, 2006 Jeep Wrangler TJ
- 2003, 2004, 2005, 2006 Jeep Rubicon
Pro Comp Suspension Part # K3076B
THE PRO COMP PROMISE WARRANTY
At Pro Comp, we know you have many choices when selecting products to personalize your vehicle. You should demand nothing but the highest quality available and have total confidence that the products you selected are the best in the industry. It is for these reasons that Pro Comp Suspension products are backed by the best warranty in the industry...the Pro Comp Promise! Pro Comp promises that its products will last a lifetime or we will replace it free of charge. It's that simple! Because of our commitment to quality and manufacturing excellence, we are able to stand behind our products. FOREVER. It is Pro Comp's Promise that if one of our suspension products breaks not due to misuse, neglect or vandalism, we will replace it. WHETHER YOU ARE THE ORIGINAL PURCHASER OR NOT, you can be assured that we will make it right. The Pro Comp Promise covers all suspension products including shocks and steering stabilizers. Buy Pro Comp Suspension today and enjoy it for the rest of your life!
That's our Pro Comp Promise!
Pro Comp warranties its full line of products to be free from defects in workmanship and materials for the life of the product. Pro Comp's obligation under this warranty is limited to repair or replacement, at Pro Comp's option, of the defective product. Any and all costs of removal, installation, freight or incidental or consequential damages are expressly excluded from this warranty. Pro Comp is not responsible for damages and / or warranty of other vehicle parts related or non-related to the installation of Pro Comp product. A consumer who makes the decision to modify his vehicle with aftermarket components of any kind will assume all risk and responsibility for potential damages incurred as a result of their chosen modifications. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design. Warranty claims can be made directly with Pro Comp or at any factory authorized Pro Comp dealer.
IMPORTANT! To validate the warranty on this purchase please be sure to mail in the warranty card.
CLAIMS NOT COVERED UNDER WARRANTY
Parts subject to normal wear; this includes bushings, bump stops, ball joints, tie rod ends and heim joints.
Finish after 90 days.
Damage caused as a result of not following recommendations or requirements called out in the installation manuals.
Pro Comp MX Series coil-over shocks are considered a serviceable shock with a one-year warranty against leakage only. Rebuild service and replacement parts will be available and sold separately by Pro Comp. Contact Pro Comp for specific service charges. Pro Comp accepts no responsibility for any altered product, improper installation, lack of or improper maintenance or improper use of our products.
